Outdoor Repeater DCS1800mhz Network Output 10watts
This big repeater can allow people to use it to improve the indoor voice service in a building by installing enough indoor antennas, the maximum coverage of this repeater is 2000 square meters in theory, but the preconditon is the outdoor signal received by the powerful outdoor antenna is strong, if the outdoor signal is poor, the acutal indoor coverage will be less accordingly, and it is not recommended to install multiple indoor antennas while the outdoor signal strength is poor.
Applications
To expand signal coverage or fill signal blink area where signal is weak or unavailable
Outdoor :Airports ,tourism regions, folf courses, tunnels, factories ,mining districts ,villages ;
Indoor :Hotels ,exhibition centers ,basements ,shipping malls , offices ,parking lots ;
Specification
Frequency |
TX: 890 ~ 915 MHz |
RX: 935 ~ 960 MHz | |
Output power |
TX: 20watts |
RX: 30watts | |
ALC control |
When in max output power, if increased less10dB input Level, the variation of the output power can be controlled within 2dB , When in max output power, if increased over10dB input Level, the variation of the output power can be controlled within 2dB or shut down repeater |
Gain |
85±2dB |
Gain control range |
≥30dB |
Gain control step and error |
Gain control step:1dB Error range:0~10dB, error ≤±1dB; 10~20dB ,error≤±1dB; ≥20dB, error≤±1.5dB |
Ripple in band |
≤2.0dB/3.84MHz(peak value),Ripple in band≤4.0dB |
Frequency error |
≤±0.01ppm |
Spectral emission |
Meet 3GPP TS 25.106 demand |
ACRR |
Meet 3GPP TS 25.106 demand |
Spurious emission |
Meet 3GPP TS 25.106 demand |
Output intermodulation |
Meet 3GPP TS 25.106 demand |
Vector range error |
EVM≤12.5% |
PCDE |
≤-35dB |
Noise figure |
≤6.0dB |
Insulation test and prevent self-excitation |
Support |
Time delay |
≤5.0us |
VSWR |
≤2.2 |
Ripple out of band |
|
3.5MHz≤f_offset≤7.5MHz≤70dB | |
7.5MHz≤f_offset≤12.5MHz≤45dB | |
12.5MHz≤f_offset≤35dB |